It’s fairly easy to create VGA with an FPGA using a simple R/2R DAC. As [Mike] points out, this requires a lot of IO pins, and many development boards only support 8 bit VGA. Analog VGA is being ...

The reports of the death of the VGA connector are greatly exaggerated. Rumors of the demise of the VGA connector has been going around for a decade now, but VGA has been remarkably resiliant in the ...

Numerous digital projector models are equipped with multiple input ports. VGA is one of the most common input types for digital projectors. If your projector and your laptop are both equipped with VGA ...

Small enough to fit on a keychain, Openterface KVM-GO is a tiny, open-source hardware KVM-over-USB gadget available with an ...

Running dual monitors can add some serious efficiencies to your working process. You can customize the configurations and bounce between both screens. Use them separately or connect them to drag ...

Check the cable connections. The cables might be loose due to which the VGA light is turned on. You can also try connecting the cable to another port (if available). The VGA light on the motherboard ...

Reader Mike ordered a new Dell system that came with a 21.5-inch LCD monitor. Although the monitor includes VGA, DVI, and HDMI inputs, it included only a VGA cable–even though the setup instructions ...

With televisions, HDMI is the most common connector. But if you want to connect a computer to your TV (or you've got a new computer monitor), the options tend to be HDMI, DisplayPort, DVI, and ...

I'm sure there is a spec somewhere (VESA or something) but here are a couple of references. Power is watts = volts * amps. Even though there was a +5V pin on a VGA connector, it may not be suitable ...

Are there _any_ other differences between these, other than NT4 just using the generic VGA driver in VGA mode?<BR><BR>Reason I ask... I have a custom driver I wrote that lets me access some normally ...